The Actual Future is Open

Open futurism is the indeterministic position according to which the future is \u2018open\u2019, i.e., there is now no fact of the matter as to what future contingent events will actually obtain. Many open futurists hold a branching conception of time, in which a variety of possible futures exist. This paper introduces two challenges to branching-time open futurism, which are similar in spirit to a challenge posed by Fine to (standard) tense realism. The paper argues that, to address the new challenges, (branching-time) open futurists must (1) adopt an objective, non-perspectival notion of actuality and (2) subscribe to an A-theoretic, dynamic conception of reality. Moreover, given a natural understanding of \u201cactual future\u201d, (3) it is perfectly sensible for open futurists to hold that a unique, objectively actual future exists, contrary to a common assumption in the current debate. The paper also contends that recognising the existence of a unique actual future helps open futurists to avoid potential misconceptions

Negative ion density in the ion source SPIDER in Cs free conditions

The SPIDER experiment, operated at the Neutral Beam Test Facility of Consorzio RFX, Padua, hosts the prototype of the H-/D- ion source for the ITER neutral beam injectors. The maximization of the ion current extracted from the source and the minimization of the amount of co-extracted electrons are among the most relevant targets to accomplish. The Cavity Ring-Down Spectroscopy diagnostic measures the negative ion density in the source close to the acceleration system, so as to have feedback information to optimize the source parameters and to maximize the amount of negative ions that can be extracted at optimal beam divergence. This work shows how the magnetic filter field and the bias currents, present in SPIDER to limit the amount of co-extracted electrons and the electron-ion stripping reactions, affect the density of negative ions available for extraction. Moreover, the influence of the extraction process on the density of negative ions available for extraction is also presented. In this study SPIDER was operated in hydrogen and deuterium in Cs-free conditions, therefore negative ions were mostly produced by reactions in the plasma volume.Comment: 13 pages, 8 figures. Preprint of a published pape

Statistical features of edge turbulence in RFX-mod from Gas Puffing Imaging

Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function, consistently with the recent results by Graves et al [J.P. Graves, et al, Plasma Phys. Control. Fusion 47, L1 (2005)]. On the other hand, pulses with external methods for plasma control feature modified PDFs. A first empirical analysis suggests that they may be interpolated through a linear combination of simple functions. An inspection of the literature shows that this kind of PDFs is common to other devices as well, and has been suggested to be due to the simultaneous presence of different mechanisms driving respectively coherent bursts and gaussian background turbulence. An attempt is made to relate differences in the PDFs to plasma conditions such as the local shift of the plasma column. A simple phenomenological model to interpret the nature of the PDF and assign a meaning to its parameters is also developed.Comment: 27 pages. Published in PPC

Microalgae production in fresh market wastewater and its utilization as a protein substitute in formulated fish feed for oreochromis spp.

Rapid growing of human population has led to increasing demand of aquaculture production. Oreochromis niloticus or known as tilapia is one of the most globally cultured freshwater fish due to its great adaptation towards extreme environment. Besides, farming of tilapia not only involves small scales farming for local consumption but also larger scales for international market which contributes to a foreign currency earning. Extensive use of fishmeal as feed for fish and for other animals indirectly caused an increasing depletion of the natural resource and may consequently cause economic and environmental unstable. Microalgae biomass seems to be a promising feedstock in aquaculture industry. It can be used for many purposes such as live food for fish larvae and dried microalgae to substitute protein material in fish feed. The microalgae replacement in fish feed formulation as protein alternative seem potentially beneficial for long term aqua-business sustainability. The present chapter discussed the potential of microalgae as an alternative nutrition in fish feed formulations, specifically Tilapia

POTENCIAL DE DISSEMINAÇÃO DE Salmonella sp. PROVENIENTE DE LINFONODOS MESENTÉRICOS DE SUÍNOS ABATIDOS NA REGIÃO OESTE DO PARANÁ PARA SUPERFÍCIE DE MESA DE INSPEÇÃO DE VÍSCERAS BRANCAS, FACAS E LUVAS DE AUXILIARES DE INSPEÇÃO DURANTE A INSPEÇÃO POST-MORTEM

O presente estudo foi realizado com o objetivo de verificar os sorovares de Salmonella sp. em linfonodos mesentéricos de suínos, bem como o potencial de disseminação deste agente durante as atividades de abate e inspeção, correlacionando-os com as superfícies amostradas. Esses animais foram criados sob confinamento e abatidos em estabelecimento sob Inspeção Federal localizado na região oeste do Paraná. O experimento foi realizado em cinco repetições sendo que em cada uma foram coletadas 30 amostras de linfonodos mesentéricos, 12 suabes de mesas de inspeção de vísceras brancas, oito suabes das lâminas de facas utilizadas durante a inspeção dos linfonodos e quatro suabes da superfície das luvas dos auxiliares de inspeção em diversos momentos do abate. A partir da análise microbiológica da cadeia linfática mesentérica de 150 animais, encontrou-se Salmonella sp em 17,3% (26/150) dos linfonodos analisados. O agente ainda foi isolado em 5,0% (2/40) das superfícies de lâminas de facas amostradas e em 28,3% (17/60) das mesas de inspeção de vísceras brancas. Nenhuma amostra positiva (0/20) foi encontrada nas luvas dos inspetores. Pode-se concluir que sorovares de Salmonella originários de linfonodos mesentéricos e encontrados em superfícies que entram em contato com o produto demonstram o potencial de disseminação do agente durante o processo de abate com consequente contaminação cruzada. PALAVRAS-CHAVE: linfonodos mesentéricos; Salmonella sp.; suínos

Start of SPIDER operation towards ITER neutral beams

Heating Neutral Beam (HNB) Injectors will constitute the main plasma heating and current drive tool both in ITER and JT60-SA, which are the next major experimental steps for demonstrating nuclear fusion as viable energy source. In ITER, in order to achieve the required thermonuclear fusion power gain Q=10 for short pulse operation and Q=5 for long pulse operation (up to 3600s), two HNB injectors will be needed [1], each delivering a total power of about 16.5 MW into the magnetically-confined plasma, by means of neutral hydrogen or deuterium particles having a specific energy of about 1 MeV. Since only negatively charged particles can be efficiently neutralized at such energy, the ITER HNB injectors [2] will be based on negative ions, generated by caesium-catalysed surface conversion of atoms in a radio-frequency driven plasma source. A negative deuterium ion current of more than 40 A will be extracted, accelerated and focused in a multi-aperture, multi-stage electrostatic accelerator, having 1280 apertures (~ 14 mm diam.) and 5 acceleration stages (~200 kV each) [3]. After passing through a narrow gas-cell neutralizer, the residual ions will be deflected and discarded, whereas the neutralized particles will continue their trajectory through a duct into the tokamak vessels to deliver the required heating power to the ITER plasma for a pulse duration of about 3600 s. Although the operating principles and the implementation of the most critical parts of the injector have been tested in different experiments, the ITER NBI requirements have never been simultaneously attained. In order to reduce the risks and to optimize the design and operating procedures of the HNB for ITER, a dedicated Neutral Beam Test Facility (NBTF) [4] has been promoted by the ITER Organization with the contribution of the European Union\u2019s Joint Undertaking for ITER and of the Italian Government, with the participation of the Japanese and Indian Domestic Agencies (JADA and INDA) and of several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache. The NBTF, nicknamed PRIMA, has been set up at Consorzio RFX in Padova, Italy [5]. The planned experiments will verify continuous HNB operation for one hour, under stringent requirements for beam divergence (< 7 mrad) and aiming (within 2 mrad). To study and optimise HNB performances, the NBTF includes two experiments: MITICA, full-scale NBI prototype with 1 MeV particle energy and SPIDER, with 100 keV particle energy and 40 A current, aiming at testing and optimizing the full-scale ion source. SPIDER will focus on source uniformity, negative ion current density and beam optics. In June 2018 the experimental operation of SPIDER has started

Electromagnetic turbulent structures: A ubiquitous feature of the edge region of toroidal plasma configurations

Electromagnetic features of turbulent filaments, emerging from a turbulent plasma background, have been studied in four different magnetic configurations: the stellarator TJ-II, the Reversed Field Pinch RFX-mod, a device that can be operated also as a ohmic tokamak, and the Simple Magnetized Torus, TORPEX. By applying an analogous diagnostic concept in all cases, direct measurements of both field-aligned current density and vorticity were performed inside the filament. The inter-machine comparison reveals a clear dependence of the filament vorticity upon the local time-averaged E x B flow shear. Furthermore, a wide range of local beta was explored allowing concluding that this parameter plays a fundamental role in the appearance of filament electromagnetic features

Spectroscopy near the proton drip line in the deformed A=130 mass region : the Pr-126 nucleus

The near proton drip line nucleus Pr-126 was studied via in-beam gamma-ray spectroscopy using the Ca-40 + Mo-92 reaction at 190 MeV. We observed for the first time excited states above the known isomer in this nucleus up to 31 h over bar. The observed band is discussed in the interacting boson-fermion-fermion model.The calculations and the experimental information suggest a spin 8(+) for the lowest observed state.With such a spin assignment the moment of inertia of Pr-126 gets larger than in the heavier Pr isotopes, suggesting a sudden change in deformation close to the proton drip line